| EN AW 7075 | ||||||||
|---|---|---|---|---|---|---|---|---|
| CHEMICAL COMPOSITION (%) | ||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
| 0,4 | 0,5 | 1,2-2,0 | 0,3 | 2,1-2,9 | 0,18-0,28 | 5,1-6,1 | 0,2 | Balance |
| EXTRUDED WIRE ROD | ||||||||
| Temper | Wall Thickness (t) (mm) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Hardness (HB) | |||
| D | S | Min | Max | Min | Max | Min | Min | |
| 0,H111 | ≤ 200 | ≤ 200 | - | 275 | - | 165 | 8 | 60 |
| T6, T6510, T6511 | ≤ 25 25< D ≤ 100 100< D ≤ 150 150< D ≤ 200 | ≤ 25 25< S ≤ 100 100< S ≤ 150 150< S ≤ 200 | 540 560 550 440 | - - - - | 480 500 440 400 | - - - - | 5 - - - | 150 150 150 150 |
| T73, T73510, T73511 | ≤ 25 25< D ≤ 75 75< D ≤ 100 100< D ≤ 150 | ≤ 25 25< S ≤ 75 75< S ≤ 100 100< S ≤ 150 | 485 475 470 440 | - - - - | 420 405 390 360 | - - - - | 5 - - - | 135 135 135 135 |
| EXTRUDED PIPE | ||||||||
| Temper | Wall Thickness (t) (mm) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Hardness (HB) | |||
| Min | Max | Min | Max | Min | Min | |||
| 0,H111 | ≤ 10 | - | 275 | - | 165 | - | 60 | |
| T6, T6510, T6511 | ≤ 5 5< t ≤ 10 10< t ≤ 50 | 540 560 560 | - | 485 505 495 | - - - | 6 5 4 | 150 150 150 | |
| T73, T73510, T73511 | ≤ 5 5< t ≤ 25 25< t ≤ 50 | 470 485 475 | - - - | 400 420 405 | - - - | 5 6 - | 135 135 135 | |
| EXTRUDED PROFILE | ||||||||
| Temper | Wall Thickness (t) (mm) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Hardness (HB) | |||
| Min | Max | Min | Max | Min | Min | |||
| T6, T6510, T6511 | ≤ 25 25< t ≤ 60 | 530 540 | - - | 460 470 | - - | 4 - | 150 150 | |
| T73, T73510, T73511 | ≤ 25 | 485 | - | 420 | - | 5 | 135 | |
